Cornelius P/N 629088650 Manuel d'utilisateur télécharger pdf (Page 1)

IDC Icemaker Adaptor Kit Installation Instructions

INSTALLATION INSTRUCTIONS

IDC ICEMAKER ADAPTOR KIT FOR P/N 629088650

FIGURE 1

1. Place bar into first set of pockets inside the ice bin.

2. Place Icemaker Adaptor Kit on top of unit.

3. Place icemaker on top of kit. DO NOT slide icemaker into position on the lid.

4. Apply a continuous bead of NSF International (NSF) listed silastic sealant (Dow 732 or equivalent),

supplied in kit to seal the icemaker to the top of the adapter kit. All excess sealant must be wiped

away immediately.

5. Secure the icemaker to the adapter by drilling 9/64” diameter holes, using one of the two brackets

supplied in the kit, into both the rear of the icemaker and rear of the icemaker adapter kit. Use

extreme care not to drill into any icemaker components!!! Secure the brackets using the screws

provided.

Icemaker Adaptor Kit

Bar

Revision Date: January 30, 2006 www.cornelius.com Revision: C

1 2

Pas de commentaire

Cornelius P/N 629088650 Manuel d'utilisateur Page 1